SSOE’s Mark LaBell, Senior Virtual Design and Construction (VDC) Technical Leader, recently authored an article in New Equipment Digest. With the need to do more with less becoming more prominent in recent years, project teams are finding it increasingly necessary to stretch budgets and deliver quickly. This article discusses how laser scanning is a primary solution for budget optimization and that, with the right combination of expertise and technology, project teams can achieve things that were never possible in the past. Read more
Eric Hopkins, PE, Senior Chemical Process Engineer and Senior Associate at SSOE, recently authored an article in Midstream Business. He shares with readers many insights to help manufacturing leaders plan for change and how understanding planning, assessment, and decision making, even in the gray areas, are crucial to the success of a project. Read more
NASHVILLE, Tennessee, April 10, 2019 – SSOE Group (www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management, is proud to announce it has been named one of the Top Engineering Firms for both the Birmingham Business Journal and Nashville Business Journal for 2019. The Top Engineering Firms List ranks the top 25 engineering firms based on the total number of licensed professional engineers. SSOE was named the third largest engineering firm in Birmingham, Alabama and the eighth largest engineering firm in Nashville, Tennessee. Read more
Sonny Hamizadeh, AIA, Principal and Architectural Department Manager for SSOE’s Healthcare, Commercial, and Education (HCE) Division recently authored an article in College Planning & Management. In this article, he shares best practices in the design of workforce development centers in higher education settings. Read more
CHICAGO, Illinois October 09, 2018 – SSOE Group (www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management, is proud to announce it has been named one of Consulting-Specifying Engineer’s 2018 MEP Giants. The MEP Giants program ranks the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms in the United States based on total MEP design revenue. SSOE ranked 45th this year, holding steady at the same spot as their 2017 ranking. In 2016, SSOE jumped 37 spots. Read more
Cliff Reese, PE, Business Leader and Senior Associate at SSOE, recently authored an article in Area Development explaining how obtaining early commitment from both buyers and stakeholders is imperative to a successful modular construction project, which can deliver on cost savings and shorten timeliness. He goes on to discuss how leaders could consider using Advanced Work Packaging (AWP), similar to Lean project delivery, as an option to significantly optimize the efficiency of site-labor costs as well as the project schedule. Read more
POINT CLEAR, Alabama, August 9, 2018 – SSOE Group (www.ssoe.com), a global architecture, engineering, and construction management firm, announced today that Alexandra Segers, Dipl.-Ing, PE, Program Manager and International Senior Account Executive at SSOE, and General Manager of the firm’s Southeast U.S. operations, was invited to present at the Economic Development Association of Alabama (EDAA) Summer Conference. The event took place August 5-8, 2018 at the Grand Hotel in Point Clear, Alabama. Read more
TOLEDO, Ohio, August 6, 2018 – SSOE Group (www.ssoe.com), a global architecture, engineering, and construction management firm, is proud to celebrate 70 years in business this coming Wednesday, August 8, 2018.
SSOE was founded in 1948 when structural engineer Al Samborn returned to his hometown of Toledo after completing his military service to start his own engineering firm. Today, the firm has grown into a Top 10 Engineering / Architecture firm (BD+C) with 1,100 employees in 30 global offices across six countries and is one of Ohio’s largest engineering firms.
Dewayne Galyon, Basebuild Technical Specialist at SSOE, offers insights into cleanroom humidification challenges in this New Equipment Digest article. While there are numerous complex cleanroom challenges, humidity is a major factor in keeping cleanrooms free of electrostatic charge and moisture. Within the article, Dewayne explains how it takes a seasoned professional to analyze various changes and determine which are indicative of deeper issues and which are the result of a small change in operating. He then goes on to speak to the humidification specific challenge and the solutions.
TOLEDO, Ohio, August 3, 2018 – SSOE Group (www.www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management is proud to announce their re-certification as a “Great Workplace” by the independent analysts at Great Place to Work®. SSOE earned this credential based on exemplary ratings provided by their employees in an anonymous survey.
Corey Zachel, PE, LEED AP BD+C, Section Manager and Senior Associate at SSOE, recently authored an article published in Industrial Maintenance & Plant Operation Magazine (IMPO) that explains how to avoid shutdowns at manufacturing facilities. In this industry, repairs are inevitable, however complete shutdowns can create a major loss in revenue. Zachel writes that careful planning and tracking, data from previous work, as well as preparing for the unexpected can all help to lessen the chance of a shutdown.
Alexandra Segers, Dip.-Ing, Program Manager and International Senior Account Executive at SSOE, and General Manager of the firm’s Southeast U.S. operations, was recently featured in Area Development where she shares her advice for picking the best time to select a site location for a new project. The site selection phase will lay the groundwork for the design and construction phases that follow. Therefore, it is important that the team enlists the help of an expert consultant to ensure the site location is managed correctly. Read more
Mark LaBell, BIM / CAD Technical Leader, recently authored an article on laser scanning featured in Manufacturing Automation Magazine. Within, Mark discusses how laser scanning speeds up a project, reduces costs, and improves safety. Although there are challenges when adjusting laser scanning for specific projects, he writes that understanding project goals is key. Laser scanning is quickly becoming the go-to tool for reality capture—replacing the time consuming and less accurate method of manually recorded field measurements and ultimately creating an incredibly realistic and detailed 3D model. The article dives deeper into insights and benefits of using this innovative technology. Read more
Firm Named to Four Top 10 Spots
TOLEDO, Ohio, July 11, 2018 – SSOE Group (www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management is proud to announce their annual Engineering News-Record (ENR) rankings.
The rankings were published in the 2018 ENR Top 500 Design Firms Sourcebook. ENR serves as one of the leading engineering and construction news publications. This list provides market analysis and rankings of the largest U.S.-based AEC firms according to revenue for design services performed in 2017.
Alexandra Segers, Dip.-Ing, Program Manager and International Senior Account Executive at SSOE Group and General Manager of the firm’s Southeast U.S. operations, shares her advice for establishing the suitability of a site in this Area Development article. Evaluating a site with a comprehensive due diligence process that includes adequate research and planning is key to avoiding issues in the design and construction phases. With a lot at stake when selecting a site for a new facility, enlisting the help of an expert to ensure the appropriate studies of the site location and its environment are conducted is the safest bet. Read more
Corey Zachel, PE, LEED AP BD+C, Section Manager and Senior Associate at SSOE Group, recently highlighted the importance of proactively coordinating manufacturing equipment maintenance schedules in this IMPO Magazine article. Corey suggests pulling in experts to avoid guesswork and rework—and rather than waiting for a breakdown, figure out what’s needed to keep equipment running without a hitch to avoid problems altogether. Through various examples from out in the field, he shares how regular evaluations and preventive maintenance could have helped avoid costly disruptions to production and multiple headaches along the way. Read more
Vince DiPofi, PE, Chief Operating Officer at SSOE, was featured in ENR’s May 2018 cover story, “The Top 500 Design Firms: Worry Despite Strong Markets”. From construction tariffs to talent acquisition, the article highlights some of the concerns surrounding the industry, despite its predicted continual growth. Vince’s commentary focuses on the impact of generative design and its ability to help architects and engineers deliver better solutions to clients. Read more
Eric Hopkins, PE, Senior Chemical Process Engineer and Senior Associate at SSOE, continues his examination of the advantages of energy assessments in this Chem.Info Magazine article. In Part I of the article, he discusses the importance of planning and how to manage documentation and data disparities. In Part II, he focuses on strategy and involving key stakeholders to optimize the assessment process and qualify your data to achieve better results. Ultimately, a thoughtful, pragmatic approach to energy assessments will allow for continuous global competitive benefits long after the assessment is complete. Read more
Eric Hopkins, PE, Senior Chemical Process Engineer and Senior Associate at SSOE, guides readers through the value of performing energy assessments to stay competitive despite the ever-changing market demands in this Chem.Info Magazine article. Although conducting an effective energy assessment can have its challenges and constraints, the in-depth data it provides often points plant owners to exactly where spending will be most lucrative for their specific operations. Eric shares his recommendations for navigating gaps in documentation and data and how careful planning upfront can make all the difference. Read more
HUNTSVILLE, Alabama, April 3, 2018 – SSOE Group, a global project delivery firm for architecture, engineering, and construction management, continues to grow in the Southeast U.S. To support this growth and strategic commitment to the Southeast U.S., SSOE has appointed Bob McCain, PE, Vice President, as Division Manager to oversee Alabama Industrial Operations. Read more
Tony Sabat, BIM / CAD Technical Specialist and one of several licensed drone pilots at SSOE, discusses the shift in reality capture as a result of drone / unmanned aerial vehicle (UAV) technology in this AEC Next article—spoiler: reality capture is now easier than ever. Using this non-destructive technology to generate a 3D model can be a game changer, allowing you to turn assets into detailed, accurate deliverables. With the drone’s speed, mobility, and safety, it has become the most efficient method for capturing the existing conditions of many facilities and sites, with added benefits downstream. Read more
SHANGHAI, China, February 20, 2018 – SSOE Group (www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management, is proud to announce the opening of their new office in Chengdu, Sichuan province China.
In 2005, SSOE opened its first international office in Shanghai to support a variety of automotive and manufacturing plant-development projects for multinational corporations in and around China. Today it has grown to be one of the firm’s largest offices and experienced its best year on record in the past 5 years in 2017. SSOE’s new Chengdu office will be staffed with local resources and will enhance SSOE’s presence within the Asia-Pacific region. Read more
Corey Zachel, PE, LEED AP BD+C, Section Manager and Senior Associate at SSOE Group, recently discussed the topic of design-build expansion projects in this Plant Engineering Magazine article. Tight project deadlines combined with competitive, rapidly changing manufacturing environments can result in a myriad of challenges—most of which are avoidable with thoughtful planning. Choosing a plan-oriented approach that brings in all parties to participate early in the design phase can eliminate issues downstream, making costly schedule delays, unnecessary rework, and production shut downs a thing of the past. Read more
Dewayne Galyon, Basebuild Technical Specialist at SSOE, dives back into statistical process control (SPC) in this Reliable Plant Magazine article. SPC—a method of quality control that assists manufacturers in maximizing production, minimizing waste, and keeping costs down—consists of multiple procedures designed to monitor conditions critical for maintaining process control, which vary depending on the type of facility. Dewayne walks readers through his guidelines for fully leveraging the advantages of SPC, which can make significant impacts to a plant’s bottom line when correctly applied to a process. Read more
Dewayne Galyon, Basebuild Technical Specialist at SSOE, illustrates his keen understanding of statistical process control (SPC) in this article recently featured in Processing Magazine. An essential tool for controlling quality in cleanroom manufacturing processes, SPC works to identify problem areas and increase optimization, uncovering contaminant sources farther down the production line that may have otherwise remained undiagnosed. Read more
Jason Christen, PMP, Senior Account Executive at SSOE, and Mark LaBell, Senior VDC Technical Leader, were both featured in a BD+C Magazine article that examines the rise of 3D laser scanners, which have recently evolved into handhelds. 3D laser scanning is the fastest, most efficient method to capture existing conditions. In addition to allowing us to scan harder-to-reach places, handheld scanners provide the ability to show clients results immediately after taking a scan with a workable model showing an accurate representation of the facility—a major benefit of the technology that often translates into cost savings for our clients. Read more
TOLEDO, Ohio, August 18, 2017 – SSOE Group (www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management is proud to announce their re-certification as a “Great Workplace” by the independent analysts at Great Place to Work®. SSOE earned this credential based on exemplary ratings provided by their employees in an anonymous survey. Read more
Gavin Kaleta, PE, LEED AP BD+C, Mechanical Department Manager at SSOE, recently authored an article published in Area Development Magazine discussing the advantages of preliminary project planning, concise scheduling, and front-end loading (FEL) when renovating an existing manufacturing facility. Even experienced teams benefit from deliberate, phased steps early on in a project, which alleviate productivity issues and inefficiency later on. Gavin’s advice for creating significant savings: spend early. By creating room in the budget for early FEL, you’re investing in up-front engineering that consistently delivers long-term cost benefits, while avoiding unplanned downtime and the dreaded shut down. Read more
LAGRANGE, Georgia, July 11, 2017 – Sentury Tire, a global advanced-technology tire manufacturer of automotive and aircraft tires, selected SSOE Group, a global project delivery firm for architecture, engineering, and construction management, to design its 1.4 million square foot tire manufacturing facility in LaGrange, Georgia. Read more
Corey Zachel, PE, LEED AP BD+C, Section Manager and Senior Associate at SSOE Group, recently authored an article published in Industrial Maintenance & Plant Operation Magazine (IMPO) that encourages early process planning and consistent, inclusive communication to better anticipate the inevitable last-minute changes that occur on manufacturing projects. Using examples illustrating some of the challenges that can emerge late in the project game, Corey shares lessons learned to prepare readers for similar project hurdles. By defining for stakeholders what is driving the project—such as speed to market, product quality, or cost containment—the team is able to prioritize project objectives, while avoiding disputes and mediocre results. Read more
TOLEDO, Ohio, May 18, 2017 – SSOE Group (www.ssoe.com), a global project delivery firm for architecture, engineering, and construction management, announced the appointment of Brian Lloyd as Senior Account Executive. He is responsible for the growth of SSOE’s industrial process business with a main focus on services to chemical manufacturing clients.
Prior to joining SSOE, Brian was a director of sales and marketing in the Cincinnati area covering the Ohio, Kentucky, and Indiana territory. Additionally, Brian spent 9 years of his career working in a technical services consultant role, serving clientele in a wide range of industries including healthcare, higher education, utilities, and manufacturing. In total, he has 14 years of professional experience providing architectural and engineering services to commercial and industrial clients. Read more
Vince DiPofi, PE, Chief Strategy Officer at SSOE Group, was featured in ENR’s May 2017 cover story, “The Top 500 Design Firms: Market Poised for Takeoff”. From healthcare reform and regulation changes to the race to rebuild U.S. infrastructure, the article highlights some of the questions and concerns surrounding the industry following the recent election. Although preliminary indicators point to a strong, healthy market and we’ve already seen an increase in private sector jobs, a theme of caution continues to persist.
Vince, who has experienced nine presidential elections during the course of his career, comments on the buzz surrounding the election and its effect on the industry. He also discusses how potential changes to the North American Free Trade Agreement (NAFTA) have already impacted the automotive market, as seen in postponed spending. Read more
Jim Lewis, Electrical Controls Department Manager and Principal at SSOE, recently authored this informative article in Area Development Magazine advising readers to take a business-driven approach to utility projects. Whether your project is driven by production capacity, energy efficiency, regulatory requirements, or environmental sustainability, the ultimate objective is to add value to the business. Jim shares examples showing how a utility challenge can be turned into a business advantage. Read more
Alan Liddy, AIA, NCARB, Senior Project Manager at SSOE, was recently published in Product Design and Development Magazine on the topic of cleanrooms. Alan explains that keeping cleanrooms clean can come at a lower cost, depending on the cleanroom’s classification, while offering strategies to cut costs without cutting corners. Clean standards continue to climb, but with a few operational enhancements, you can avoid contamination economically. Read more
Jens Ebert, PE, PMP, Senior Project Manager at SSOE, recently authored this article, which examines the phased approach to project execution referred to as front-end loading (FEL) and its many advantages. Also known as pre-project planning (PPP) and front-end engineering and design (FEED), the FEL approach to project delivery involves early project planning and engineering, so that design changes are easier and cheaper to accommodate, comparatively. FEL is very structured and can require more cost upfront, but projects are less likely to have issues or costly changes, and gives stakeholders an opportunity to make more informed decisions along the way. Read more
SSOE experts, John Gill, PE, PMP, Director of Virtual Design and Construction, and Mike Duffey, PE, Principal Account Executive, explore the many benefits of combining an integrated approach with Virtual Design and Construction (VDC) to achieve a collaborative aerospace facility. With this approach, significant advantages result, including a more transparent and collaborative team environment that fosters participation and valuable input during the early stages of a project, increased flexibility and efficiency during the project’s development in the virtual world, and reduction of RFIs. On average, SSOE has seen 20%+ schedule reduction through strategies including concurrent engineering and the use of prefabrication and modularization. Read more
TOLEDO, Ohio, June 7, 2016 – SSOE Group, (www.ssoe.com) a global project delivery firm, specializing in engineering, architecture, and construction management is proud to announce their certification as a “Great Workplace” by the independent analysts at Great Place to Work®. SSOE earned this credential based on exemplary ratings provided by their employees in an anonymous survey. Read more
TOLEDO, Ohio, May 19, 2016 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm is proud to announce that Michael Duffey, PE, Principal Account Executive, has been nominated to serve as the next President of the American Council of Engineering Companies (ACEC) Ohio, effective July 1, 2016. Read more
Alexandra Segers, Dipl.-Ing, PE, MS, General Manager of SSOE’s Southeast U.S. operations, was recently published in Area Development Magazine discussing the worldwide trend of OEMs—and subsequently suppliers—moving operations to Mexico. With this number growing every day, Alexandra reminds readers the Southeast U.S. is still a viable, competitive option for automotive parts production. Read more
Thomas Nestor, PE, responds to some common electrical challenges faced on projects, and guides readers through examples of careful pre-planning strategies in this article recently published in Plant Engineering Magazine. Thorough research combined with a unified, “holistic” approach can help meet invariable objectives such as budget adherence, plant safety, reliability, and productivity. Capturing accurate, comprehensive information and fully understanding existing conditions, although laborious and often difficult, is critical as it directly correlates to the success of a project. Read more
SSOE Group is a leader in leveraging the latest technology to enable integrated and collaborative project delivery. SSOE Group was featured in BOSS Magazine, in an article highlighting the company’s technology strategy and culture — both of which are helping provide better solutions to clients. Driven by collaboration, SSOE is using innovative tools and customized applications to deliver high quality projects more efficiently, while working to maintain employee engagement along the way. Read more
Gavin Kaleta, PE, LEED AP, Mechanical and Process Department Manager at SSOE Group, co-authored an article published in HPAC Engineering Magazine that focuses on high-performance fan systems, which are critical to industrial processes. From air flow to duct leaks, the article digs deep into ANSI/AMCA Standard 210/ANSI/ASHRAE Standard 51, sharing real-world applications to optimize fan performance. Read more
Firms being asked to play a bigger role in providing expertise
Dave Sipes, Chief Operating Officer at SSOE Group, was featured in this article recently published in Engineering News-Record (ENR). The article highlights manufacturing, a particularly robust market currently, and the need within this market to improve processes — with an emphasis on output. Popular among manufacturers is integrated project delivery, a concept that focuses on collaboration and commitment among all parties, which is successfully executed with the help of highly evolved technologies like 3D modeling and laser scanning. Read more
John Gill, PE, PMP, LEED AP, SSOE’s Director of VDC, was recently published in Engineering News-Record (ENR) discussing the topic of Virtual Design and Construction (VDC). Gill has over 20 years of industry experience and was responsible for the implementation of SSOE’s VDC program. He writes on the many strengths the VDC framework has to offer our industry, and offers some tips for implementing a solid foundation on your next project. Read more
In our latest newsletter, we are highlighting the outstanding performance of Jonathan Bolbach and Mark LaBell, winners of SSOE’s Founder’s Award. Their accomplishment — developing the AutoNavis software application — met two of the award’s key criteria: delivering exceptional value to clients by saving them time, trouble, and money and implementing an innovation that leads to improved processes and quality. Read more
In moving a project from statement of work to completion of construction, regular collaboration between owners, designers, and contractors is no longer a luxury. It is the managerial insurance the project must have in order to stay on schedule and budget. Much of the unbudgeted time and expense incurred by change orders can be attributed to a lack of integration between the players. It’s often because these parties failed to include the resources and intentional effort for collaboration. Read more
Alexandra Segers, Dipl.-Ing, PE, Program Manager and International Account Executive at SSOE Group, was recently featured in this Site Selection Magazine article discussing Mexico as a growing, viable option for major league players in automotive (think Toyota, Ford, and BMW) who are crossing the border to set up shop. BMW sites the country’s high number of international trade agreements as a significant determinant in taking operations to Mexico. Segers, who is no stranger to international site selection and advised BMW on the project, explains that much evaluation goes into the decision-making process, with reliability and water being popular concerns for companies considering an investment in Mexico to better serve their customers.
Joe Badalamenti, PE, PMP, Business Development Executive at SSOE Group, was recently featured in this article in Food Engineering Magazine. Based on the publication’s annual survey, food and beverage projects were on the uptick in 2014, and Badalamenti and other AEC experts weigh in on what’s trending and why. From renovations to greenfield projects, processors are loosening their money belt, but spending sensibly — making purchases that improve efficiency, with a focus on food safety and increased automation. These improvements are a win-win for processors, helping them differentiate themselves among the pack of competitors while getting product to market for less. Read more
POINT CLEAR, Alabama, July 10, 2015 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, announced today that Alexandra Segers, Dipl.-Ing, PE, Program Manager and International Senior Account Executive at SSOE, has been invited to present at the Economic Development Association of Alabama (EDAA) Summer Conference. The event will take place July 19-22, 2015 at the Grand Hotel in Point Clear, Alabama. To supplement her presentation “Changes in the Site Selection Process,” Segers will also facilitate a panel discussion on “the New Automotive Corridor”; Dennis Cuneo, Outside Board Member for SSOE will participate as a panelist. Read more
Monterrey, Mexico, May 29, 2015 – SSOE Group (www.ssoe.com), ranked 12th internationally among Engineering Firms (Building Design + Construction, 2014), announced today that they have opened an office in Monterrey, Nuevo León, Mexico—their second office in the country. SSOE’s first office was opened in early 2014 in the city of León, Guanajuato, Mexico to support the region’s growing automotive manufacturing base. The addition of the Monterrey office will allow SSOE to better serve for our current food and automotive clients located in Saltillo, Ramos Arizpe, Monterrey, and surrounding areas, with a closer geographical concentration of resources. It is the second office SSOE has launched to serve the growing industrial investment in North America in as many months. Read more
A thorough process definition lays the foundation for a successful greenfield project
Dale Feldhaus, department manager in Industrial Process Controls at SSOE Group, was recently published in Chemical Processing Magazine. In his article, he discusses the importance of the preliminary phase of a greenfield project, which Feldhaus refers to as the “process definition phase.” Feldhaus has nearly 30 years of experience, specializing in the design, specification, and coordination of controls and instrumentation for projects within the industrial industry. Read more
SSOE was featured in this Laboratory Design Magazine article highlighting a recently constructed five-story, 125,000 SF science and technology facility for which SSOE provided mechanical and electrical services, in addition to fire protection construction documents. This facility, referred to as Horizon I, supports programs in engineering, technology, scientific research, and industrial development of alternative energy sources—also serving to adjoin the University of South Carolina’s main campus and its “new urban ‘innovista’ research campus. Read more
ATLANTA, Georgia, May 05, 2015 – SSOE Group (www.ssoe.com), a global project delivery firm ranked 4th among Automotive Plant Design Firms (Engineering News-Record, 2014), is proud to announce the opening of a new office in Atlanta, Georgia. The office will serve as the hub for the firm’s Southeast U.S. operations, currently anchored by four existing SSOE regional offices in Birmingham, Alabama; Huntsville, Alabama; Nashville, Tennessee; and Raleigh-Durham, North Carolina.
“SSOE’s expansion into the Southeast U.S.,” comments CEO Bob Howell, “dovetails with the area’s projected growth and will enhance the firm’s expansive portfolio in the region.”
Mark Hoffman, Department Manager at SSOE Group, was recently featured in this article in Food Engineering Magazine. The article works to demystify airflow and room pressure questions in relation to food production, and offers expert suggestions to ensure cleanliness is achieved and cross-contamination avoided — namely at points in the process where the product is most vulnerable. From pressure differential gauges and processors, to filtration options and software tools, this article effectively covers a lot of ground, offering a collection of valuable tips that are far from intuitive. Read more
In the AEC industry, when a client asks for a project to be completed “faster, better, and cheaper,” chances are they will be told that two out of three is about as good as it gets. Thanks to technology, integrated delivery methods, and an exceptional team effort, SSOE raised the bar and delivered on all counts on a recent project for a global leader in the food industry.
Tom Fitzpatrick, Power Department Manager at SSOE Group, co-authored this content-rich article, published in Power Engineering Magazine, that explores the cost benefits of conducting a feasibility study during the planning phase of a project. The article highlights project examples where SSOE’s engineers were able to add even more value to a feasibility study with their ability to quickly and easily assess, and point decision-makers in the right direction.
Foreign companies are trending in the direction of the U.S. as they review global site selection options, with suppliers following.
Alexandra Segers, International Senior Account Executive / Program Manager at SSOE Group, shares her insight in this article published in Area Development Magazine. Within, Segers discusses some of the important items — including incentives and cost offsets, utility factors, and workforce availability — that are making the U.S. an advantageous area to consider development, with the Southeast U.S. leading the pack.
Correct design basis requires deep understanding of raw material characteristics and facility conditions.
Mark Hoffman, PE, PMP, Department Manager in Food and Consumer Products at SSOE Group, was recently published in Pharmaceutical Manufacturing Magazine. Hoffman has over 30 years of experience in project and engineering management in the pharmaceutical processing, food processing, nutraceutical processing, bio-processing, renewable energy, ammonia refrigeration, and food ingredient industries. In his article, he explains how a consistently dependable environment for raw material storage and conveyance is imperative to practical and profitable production flow in pharmaceutical manufacturing.
A roundup of tools and services that architects are using to break free from company servers and physical boundaries.
Lauren Collier, Assoc. AIA, design technology section manager at SSOE Group, is featured in this article recently published in ARCHITECT Magazine. The article reviews recent industry trends related to cloud-based system use, going beyond file sharing and backup. Companies are beginning to incorporate the cloud into schematic design, project management, energy performance analysis, renderings, and other outsourced tasks. The cloud offers adept speed that releases us from our dependency on less-efficient company servers, and generating productive collaboration.
Third party assessments can provide crucial insights.
Peter Wilmarth, RA, an architect at SSOE Group with over 35 years of experience, offers his thoughts as to how those of us in the chemical industry can gain insight from the West Fertilizer plant explosion in his recent Chemical Processing Magazine publication. The tragic blast occurred in 2013 in West, Texas — killing 15 people and injuring over 160 — and elevated the issue of safety in relation to hazardous industrial processes.
Vince DiPofi, Chief Strategy Officer at SSOE Group, is featured in the July issue of Engineering News-Record (ENR) Magazine. The article discusses current trends in manufacturing, in addition to the new technologies appearing in the automotive sector.
The article “Effective Manufacturing Construction Project Management: On Site, and On It” in Area Development Magazine’s 3rd Quarter issue discusses how an on site owner’s representative solves problems and adds value by assuring coordination of trades and maintaining project focus. In addition, John Hernandez, Section Manager at SSOE discusses how hiring the right person for the job, whether a current employee, member of a consulting engineering firm on the project, or a member of a firm with no other project contract will save the client time, trouble, and money while completing their project.
POINT CLEAR, Alabama, July 15, 2014 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, announced today that Alexandra Segers, Dipl.-Ing, PE, EPCM Program Manager and International Senior Account Executive at SSOE, along with Galen Thackston, Executive Vice President of Goodwyn Mills Cawood, has been invited to present at the Economic Development Association of Alabama (EDAA) Summer Conference. The event will take place July 27-30, 2014 at the Grand Hotel in Point Clear, Alabama.
Food Engineering Magazine’s 37th Annual Plant Construction Survey takes a look at key trends such as sanitation, food safety, and efficiency which have influenced projects in 2013. Jerry Rudie, Senior Project Manager at SSOE provides his observation of the move toward increased expansions to existing plants rather than new plant construction. In addition, Rudie reports on the move toward further automation of processes in order to reduce labor costs and justify additional capital expenditures.
Toledo, Ohio – June 3, 2014-— SSOE’s Board of Directors announced today that it has selected Bob Howell to be the next President and CEO of SSOE Group—a global engineering, procurement, and construction management (EPCM) firm . Effective December 3, 2014, Bob Howell will assume the reins from current CEO, Tony Damon, who announced his plans to retire late last year.
Whenever a company needs new manufacturing facilities to capture market share, getting up and running quickly is critical. It needs to pick a firm with solid experience, one that won’t flinch at challenges that might arise, and will do what it takes to meet an aggressive schedule. In this case, the firm is SSOE. The market is the oil and gas industry and the product is high quality API Grade steel tube – over 500,000 metric tons annually.
TOLEDO, Ohio, February 27, 2014 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, is proud to announce the selection of nine employees and one consultant as recipients of their 2013 Founder’s Award. Initiated in 2008, the Founder’s Award recognizes exemplary execution of SSOE’s core principles—innovation through quality improvements and value-added solutions, great client service, and diversification. Two project teams were the focus of this year’s awards for their substantial contribution to our clients’ success and documented savings of time, trouble, and money. Combined, these two projects, the State of Tennessee’s Memphis Regional Megasite and a program of projects for U.S. Smokeless Tobacco Co. have a documented millions in potential savings for the clients.
León, Mexico February 14, 2014 – SSOE Group (www.ssoe.com), ranked 10th internationally among Manufacturing Design Firms (ENR, 2013), announced today that they have opened operations in León, Guanajuato, Mexico—their first office in the country. SSOE now has operations in eight countries. Over the next three years, SSOE plans to hire 25-30 individuals to support the León office. SSOE’s expansion into Mexico continues the company’s trajectory of international growth; the firm has added nine offices in new geographic markets in the last three years through both acquisition and organic expansion.
When Germany-based KSM decided to advance its global production footprint by setting up operations in the U.S., they enlisted SSOE to help with site selection. SSOE began by developing the site criteria for the company’s new greenfield high-pressure aluminum castings plant into an RFP. SSOE solicited bids from various states, performed site evaluations, recommended a site, and supported negotiations of the settlement contracts.
KSM was very pleased with the results and extended the scope of SSOE’s services with the conceptual design and cost estimate for the Shelby, North Carolina location. We then performed all design and engineering services for the new facility and acted as the Owner’s Representative which included providing an onsite contact.
SSOE used a cost / benefit analysis, including value engineering, to help KSM determine its “must haves” — items required for production support — verses its wants. This analysis helped the client create a facility that projected the image they were looking for while keeping costs within budget. In fact, by applying intense value engineering, SSOE was able to reduce estimated completion cost by 33%.
To keep the project on track required prioritizing production areas and construction packages. And to keep the budget intact, SSOE drew on its design solutions that had been successful in other automotive applications.
At this point, site work is complete and Phase 1 construction is underway. The design included expansion areas to be built out as needed for future growth of operations.
Shanghai, China, September 27, 2013 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, announces that it will continue its’ support again this year as a Platinum Sponsor for AmCham Shanghai’s Manufacturing Summit, presented by the AmCham Shanghai Manufacturers’ Business Council and Suzhou Committee. The event is being held October 17th, 2013 at the Ritz Carlton Hotel in Shanghai.
TOLEDO, Ohio, August 19, 2013 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm announced today it has been named to 7 Top 10 spots in the recently released, revenue-based ENR rankings, the premier publication covering the AEC industry.
Senior Project Manager, Bob Van Antwerp is interviewed for his perspective on issues critical to the overall food industry marketplace in Food Manufacturing Magazine’s July/August 2013 “Brainstorm”. Within, Van Antwerp expands on the following options food manufactures have to reduce energy costs – new technology, cooling load energy reduction, and utility incentives.
SSOE’s Volkswagen Chattanooga Plant project is featured in Engineering Inc.’s Grand Award Recipient Article as one of the eight grand award winners for Engineering Excellence at the 47th Annual Engineering Excellence Awards. The $1 billion production facility produces the Passat and became the first and only LEED® Platinum automotive plant in the world, the first LEED platinum industrial campus in the U.S., and the largest platinum project in the U.S. (based on building area). Read more
Toledo, Ohio, May 31, 2013 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm along with their client Volkswagen Group of America is proud to announce that it has received one of eight Grand Awards for Engineering Excellence at the 47th Annual Engineering Excellence Awards—a national juried competition sponsored by the American Council of Engineering Companies (ACEC). The award, presented in honor of the new Volkswagen Assembly Plant in Chattanooga, Tennessee, was presented to SSOE and Volkswagen representatives at an award gala in Washington D.C. on April 23, 2013.
TOLEDO, Ohio, May 20, 2013 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, announces its sponsorship of the first annual “Evolving Energy Landscape” seminar July 15-16, 2013 at Maumee Bay State Park in Oregon, Ohio. The one and a half day seminar will deliver expert information and insights about the energy industry’s complex and changing issues to arm energy users with useful knowledge to be better equipped to reach short-term energy goals and set a smart course for the future. Attendees will earn .7 continuing education hours for attending.
In the Spring 2013 issue of Area Development Magazine, SSOE’s Laura Orlich is featured and takes an in-depth look at how the Volkswagen’s Chattanooga Plant achieved LEED® Platinum certification from the U.S. Green Building Council (USGBC) in April, 2012. Orlich served as the On-Site LEED Coordinator for the Volkswagen project Read more
TOLEDO, Ohio, January 31, 2013 –SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, is proud to announce that it has been ranked second by Engineering News Record (ENR) in their 2012 Top International Design Firm Rankings survey results for Auto Assembly. The rankings were released in December and are based on revenue.
TOLEDO, Ohio, January 14, 2013 – SSOE Group, a global engineering, procurement, and construction management (EPCM) firm, and Evergreen EDC, a multidiscipline engineering, design, and construction management firm, today announced a merger of the firms. The merger will expand both firms’ geographic reach as well as provide their clients access to enhanced services and resources. The merged entity will operate under the SSOE Group name after a brief transition period.
Toledo, Ohio, November 14, 2012 –SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm is proud to announce it has been named one of Consulting-Specifying Engineer’s (CSE) 2012 MEP Giants. The MEP Giants program ranks the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms in the United States based on total MEP design revenue. SSOE ranked thirteenth, moving up six spots from 2011.
SSOE is mentioned in this article by Building Design + Construction magazine discussing ways for building teams to utilize new online tools for complex project document management. SSOE and partners employed relatively new collaboration software Read more
Shanghai, China, October 23, 2012 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, along with General Motors (GM), celebrated another significant safety milestone recently. Two million hours have been worked with no recordable incidents during Phase 2 of construction of GM’s first Chinese automotive research and development (R&D) facility, otherwise known as GM China’s Advanced Technical Center. The new facility, currently being constructed in Shanghai, celebrated two prior safety milestones of 500,000 hours worked without a recordable accident back in September 2011 and 1,000,000 hours worked without a recordable accident just five months ago in April 2012.
Tony Damon, CEO of SSOE Group, was interviewed for the August 25, 2012 edition of The Economist. Damon provides insight on questions surrounding the increasing presence of work available in China and the effects this may have on jobs locally. In response, Damon states, “global growth is a question of survival, not choice, and that profitable work in China keeps jobs in Ohio”.
Toledo, Ohio, August 20, 2012 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm announced today it has been named to 4 Top 10 spots in the recently released, revenue-based ENR rankings, the premier publication covering the A/E/C industry.
SSOE was ranked in the number two spot nationally for Green Industrial and Manufacturing Design Firms. SSOE also ranked in the Top 10 in Solar Generation (7th), Chemical Plants (8th), and Manufacturing (9th). In addition, the firm was ranked 11th in Industrial Process, among the Top 50 Power Generation Firms, and the 77th Top 500 Design Firm, up 7 spots from 2011. Read more
Chattanooga, TN, May 15, 2012 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, is proud to announce that the Volkswagen Chattanooga Assembly Plant has been awarded the prestigious Gold 2012 Edison Green Award, the highest honor among Green Award winners. The award recognizes “excellence personified by Thomas Alva Edison, inspiring the drive to remain in the forefront of innovation, creativity and ingenuity in the global economy.” The Green Award specifically recognizes the environmental and sustainability achievements at Volkswagen Chattanooga. SSOE performed architecture, engineering, and construction management for this $1 billion+ production facility which produces the 2012 Passat. SSOE also functioned as the Project Team Administrator (PTA) and Design Lead for all LEED credits.
Volkswagen’s new Chattanooga, Tennessee automotive manufacturing campus is featured in Site Selection Magazine’s May 2012 issue. SSOE Group’s Brian Spencer, PE and Louise Schlatter, NCARB, LEED AP BD+C discuss the integration of LEED principles into the design of the 2.7 million SF facility. Read more
Shanghai, China, April 10, 2012 – SSOE Group (www.ssoe.com), an international engineering, procurement, and construction management (EPCM) firm, along with General Motors (GM), is celebrating another significant safety milestone. One million hours have been worked with no recordable incidents during Phase 2 of construction of GM’s first Chinese Automotive Research and Development (R&D) facility, otherwise known as GM China’s Advanced Technical Center. The new facility, currently being constructed in Shanghai, reached its’ first milestone of 500,000 hours worked without a recordable accident just seven months ago, during construction of the Advanced Materials Laboratory Building, or Phase 1, which opened on September 21, 2011.
SSOE and GM were both represented during the celebration. President and Managing Director of the GM China Group, Kevin Wale, applauded the group noting, “This is truly a remarkable achievement – made possible only through the conscious effort each person put forth day in and day out to continuously review surroundings and look out for hazards on the job site before starting work. Safety is not just about numbers. It’s about protecting workers from injury. I want to congratulate the SSOE construction team and contractors on-site for managing the success of this project and for working with GM to support our safety program.”
TOLEDO, Ohio, April 2, 2012 – SSOE Group, an international EPCM firm, announces the acquisition of CRS Engineering & Design Consultants, a 50-person mechanical, electrical, and plumbing engineering firm with offices in Birmingham and Huntsville, Alabama. The acquisition will expand SSOE’s Southeastern U.S. presence, broaden CRS’s reach to international markets, and provide both firms’ clients access to enhanced services and resources.
CRS has been in business for over 36 years and is a multi-discipline engineering and design-consulting firm specializing in healthcare, government, higher education, and other institutional facilities. CRS offers services in electrical engineering, plumbing engineering, fire protection engineering, mechanical and HVAC engineering, lighting design, telecommunication design, and security system design.
SSOE Group is featured in Architect Magazine’s February 2012 issue. This article highlights the design and construction management SSOE performed for Volkswagen’s new automotive assembly plant in Chattanooga, Tennessee.
Toledo, Ohio, January 23, 2012 – As economists debate the state of the economy and where it’s headed— SSOE Group, a U.S. – based engineering, procurement, and construction management (EPCM) firm is thriving. In recent years, in the heart of what some are calling a mild depression, SSOE maintained profitability and earned its highest revenue numbers ever. In fact, in its 2011 fiscal year, it posted its largest revenue in the company’s 64-year history. This is proof that SSOE is demonstrating some of the growth strategies and simple shifts in mindset that other businesses will likely embrace in order to succeed in today’s economy. For SSOE, a priority in recent years is a shift in international growth, as indicated by the recent acquisition of NKS Design Technologies Pvt. Ltd. (also known as d-Tech) in Mumbai, India.
Shanghai, China, October 05, 2011 – SSOE Group (www.ssoe.com), an international engineering, procurement, and construction management (EPCM) firm, along with General Motors (GM), celebrated the outstanding safety record incurred during the construction of GM’s first Chinese Automotive Research and Development (R&D) facility, otherwise known as GM China’s Advanced Technical Center. The new facility, currently being constructed in Shanghai, reached the milestone of 500,000 hours worked without a recordable accident during construction of the Advanced Materials Laboratory Building, or Phase 1, which opened on September 21, 2011. Read more
Shanghai, China, September 29, 2011 – SSOE Group (www.ssoe.com) the EPCM firm of record, along with their client The Goodyear Tire & Rubber Company, announced today that they have successfully reached seven million hours worked with no recordable incidents at Goodyear’s newest tire plant in China. This plant, which currently produces passenger tires and soon will produce truck tires, is the largest manufacturing project under construction in China. Read more
Nashville, Tennessee, August 25, 2011 – SSOE Group (www.ssoe.com), an international engineering, procurement, and construction management (EPCM) firm, announced today that it along with leaders from Volkwagen Group of America’s Chattanooga Operations accepted the 2011 Tennessee Governor’s Environmental Stewardship Award for Building Green at the awards ceremony held in Nashville,Tennessee on August 12th. Read more
TOLEDO, Ohio, August 10, 2011 – SSOE Group (www.ssoe.com), an international engineering, procurement, and construction management (EPCM) firm, has been recognized in several sustainable design rankings recently released from Engineering News Record (ENR). SSOE ranked 1st nationally among the Top Green Design Firms in Industrial Manufacturing. In addition, ENR also named SSOE 10th among the Top Solar Power Design Firms. Rankings are based on project revenue.
SSOE Group’s Louise Schlatter, NCARB, LEED AP, and IET’s Tim Stansfield, PE, Ph.D, discuss how strategic master planning can yield capital investment decisions that optimize facilities and process. Read more
SSOE Group’s Alexandra Segers and Jeff Caldwell discuss why a thorough, expert site investigation is well worth the investment when selecting a new site for a company’s facility. Read more
Greenville, South Carolina, June 30, 2011 – SSOE Group (www.ssoe.com), an international engineering, procurement, and construction management (EPCM) firm, announced today that it is teaming with prime contractor Walbridge on the design of ZF Friedrichshafen AG’s first passenger car transmission plant in North America. Located near Greenville, South Carolina, the facility will produce fuel efficient, eight and nine-speed automatic transmissions for the passenger car and light truck market. Walbridge is leading the overall design and construction management team for the project. Read more
Findlay, Ohio, June 29, 2011 – SSOE Group (www.ssoe.com), an international engineering, procurement, and construction management (EPCM) firm, announced today that it was recently awarded the 2011 Contractor Safety & Environmental Excellence Award from Marathon Petroleum LP Marketing & Transportation Engineering. The award recognizes SSOE as a top safety performer for their facility located in Findlay, Ohio. Read more
Choosing the wrong consultant and especially the wrong property could be detrimental to your project budget and schedule. SSOE provides an overview touching on the important aspects of site selection and the details that will help you make an informed choice on a firm to partner with. In our site selection presentation, we explain our step-by-step process of securing solid ground for your facility, and how our way of working helps save you time, trouble, and money on your project. Read more
Have a question regarding our services? Need assistance with an upcoming project? Send us an email. We look forward to hearing from you and will follow up soon.