Tag Archive for: science-and-technology-feature

/in , /by

Dewayne Galyon, Basebuild Technical Specialist at SSOE, offers insights into cleanroom humidification challenges in this New Equipment Digest article. While there are numerous complex cleanroom challenges, humidity is a major factor in keeping cleanrooms free of electrostatic charge and moisture. Within the article, Dewayne explains how it takes a seasoned professional to analyze various changes and determine which are indicative of deeper issues and which are the result of a small change in operating. He then goes on to speak to the humidification specific challenge and the solutions.

Read more

/in , , , /by

Dewayne Galyon, Basebuild Technical Specialist at SSOE, illustrates his keen understanding of statistical process control (SPC) in this article recently featured in Processing Magazine. An essential tool for controlling quality in cleanroom manufacturing processes, SPC works to identify problem areas and increase optimization, uncovering contaminant sources farther down the production line that may have otherwise remained undiagnosed. Read more

/in , , /by

Industry survivors must embrace shifting paradigms in order to remain competitive in the private sector.

Suzan Huff, RA, LEED AP BD+C, Master Architect at SSOE, recently authored an article in Lab Manager Magazine highlighting three concepts trending in commercial laboratory design: flexibility, transparency, and positive branding. With traditional lab practices changing, the spaces themselves are being modified to accommodate. In addition to creating open, adaptable spaces, Suzan also recommends incorporating movable / convertible items, such as furniture, to create an easily transformable, dynamic group environment and interior and exterior image branding to better appeal to the public. Read more

/in , , , , , , /by

Alan Liddy, AIA, NCARB, Senior Project Manager at SSOE, was recently published in Product Design and Development Magazine on the topic of cleanrooms. Alan explains that keeping cleanrooms clean can come at a lower cost, depending on the cleanroom’s classification, while offering strategies to cut costs without cutting corners. Clean standards continue to climb, but with a few operational enhancements, you can avoid contamination economically. Read more

/in , , , , , , /by

Gavin Kaleta, PE, LEED AP, Mechanical and Process Department Manager at SSOE Group, co-authored an article published in HPAC Engineering Magazine that focuses on high-performance fan systems, which are critical to industrial processes. From air flow to duct leaks, the article digs deep into ANSI/AMCA Standard 210/ANSI/ASHRAE Standard 51, sharing real-world applications to optimize fan performance. Read more

/in /by

In this article featured in the October, 2015 issue of Pharmaceutical Manufacturing Magazine, SSOE’s Ed Royzman, PE and John Gill, PE, PMP take readers through an overview of Virtual Design & Construction (VDC) and its role in removing barriers between the phases of project delivery. Royzman and Gill take a look at how the benefits of VDC were leveraged on one FDA-compliant pharmaceutical project – providing significant value for process validation by allowing designers, fabricators, and contractors to input detail into the model. This resulted in a more accurate picture of building conditions, with the added benefit of all commissioning and validation efforts recorded for future facility adaptation. Read more

/in /by

Joe Kunkle, AIA, PE, LEED AP, Principal Account Executive at SSOE Group, and Lance Mushung, AIA, NCARB, Architect, co-authored this article featured in American School and University Magazine. Kunkle and Mushung, who have over 60 years of combined industry experience, confer on the subject of casework reuse. Whether you’re aiming for a LEED® certified project or significant casework cost savings, the shortcuts offered by this resourceful twosome will lead you down the right path. Read more

/in , , /by

SSOE Group’s Alan Liddy, AIA, NCARB, PMP, Senior Project Manager, and Deborah Suzan Huff, AIA, NCARB, LEED AP BD+C, Senior Associate and Architect, co-authored this technical how-to article in Laboratory Design Magazine. Lab design is unarguably involved and often perplexing, but Liddy and Huff share their lab-savvy design tips, offering solutions to four critical, yet common challenges. A project team equipped with details can ardently tackle these challenges by engaging intercommunication coupled with proficiency. Read more

/in , /by

SSOE was featured in this Laboratory Design Magazine article highlighting a recently constructed five-story, 125,000 SF science and technology facility for which SSOE provided mechanical and electrical services, in addition to fire protection construction documents. This facility, referred to as Horizon I, supports programs in engineering, technology, scientific research, and industrial development of alternative energy sources—also serving to adjoin the University of South Carolina’s main campus and its “new urban ‘innovista’ research campus. Read more

/in , , /by

David Wilson, PE, LEED AP, Senior Mechanical Engineer at SSOE Group, recently authored this article in Laboratory Design Magazine. The article explores when it’s worth it to consider commissioning for your facility through three case scenarios encountered by an HVAC commissioning expert. What is observed through testing and verification may prevent expensive operational problems from occurring, by detecting flaws and inefficiency prior to the end of the warranty period. The best approach is to be proactive in knowing what you need before it’s too late. Read more

/in /by

Architect Suzan Huff is featured in the April 2014 issue of Pharmaceutical Processing Magazine with an article on storage and space planning for laboratory environments. “Inadequate or misplaced storage space in the modern laboratory becomes that obstinate elephant in the room that everyone must work around, yet no one can seem to come up with an adequate solution to remove.” In order to resolve in the planning stage, Huff outlines the steps to achieving the optimal amount of storage space that’s placed in the most efficient matter — using experience, collaboration, communication, and creativity as key elements for success.

Read more

/in /by

The National Institute of Standards and Technology (NIST) embarks on an ambitious recycling technology as helium prices go through the roof. Ed Royzman, Principal Engineer at SSOE, tells the story of how a research institution opted to make adaptive changes that not only improves its bottom line but also sets an example for the industry – promising significant long-term returns. His article is featured in the December 2013 article of Laboratory Equipment Magazine.

Read more

/in /by

SSOE Group’s Ed Royzman, PE, and Meredith Mayes, PE, LEED AP, discuss how master planning and smart phasing are the first steps to reduced utility costs and energy compliance at federal laboratories that have outlived their electrical and mechanical systems. Read more

Tag Archive for: science-and-technology-feature

/in /by

PORTLAND, Oregon, October 10, 2014 – SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, announced today that SSOE Vice President Clem Wood will present at the annual SEMI Pacific Northwest fall breakfast forum. This year, the event is hosted by SSOE and will be held on Wednesday, October 29th, at SSOE’s office in Hillsboro, Oregon.

Read more

/in /by

TOLEDO, Ohio, December 18, 2012 — SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm is proud to announce their selection for professional services on four higher education projects in the state of Ohio. SSOE will provide architectural, engineering, data / fire / security, and LEED services for projects at Bowling Green State University, Northwest State Community College, Owens Community College, and The University of Toledo. Project scopes range from renovation of existing structures to building additions and a complete new building design program.

Read more

/in /by

Huntsville, AL, June 21, 2012 – CRS Engineering, a division of SSOE Group (www.ssoe.com), a global engineering, procurement, and construction management (EPCM) firm, along with their partner, Fuqua & Partners Architects, announce the grand opening of Dynetics’ 226,500 SF high-tech prototyping facility located in Cummings Research Park in Huntsville, Alabama.

Read more

Tag Archive for: science-and-technology-feature

/in , /by

SSOE heard it loud and clear. “This is our world headquarters and we want to show it.” It’s a predictable requirement for the world headquarters of a global company; however it’s not often that laboratories are the main focus of the space. Kemin, however, understood their laboratories were the best means to demonstrate to customers their passion for innovation. Read more

/in , , , , , , /by

Choosing the wrong consultant and especially the wrong property could be detrimental to your project budget and schedule. SSOE provides an overview touching on the important aspects of site selection and the details that will help you make an informed choice on a firm to partner with. In our site selection presentation, we explain our step-by-step process of securing solid ground for your facility, and how our way of working helps save you time, trouble, and money on your project. Read more

Contact Us

Have a question regarding our services? Need assistance with an upcoming project? Send us an email. We look forward to hearing from you and will follow up soon.

Contact Us

Our Services

© SSOE GROUP 1948-2025
Legal | Privacy Policy | CA Privacy Policy

Employee Portal
Vendors / Subcontractor

Website designed and developed by
Raincastle Communications, Inc.