Product Design and Development Magazine Article: “How to Reduce Cleanroom Costs by Using Less Energy”
Alan Liddy, AIA, NCARB, Senior Project Manager at SSOE, was recently published in Product Design and Development Magazine on the topic of cleanrooms. Alan explains that keeping cleanrooms clean can come at a lower cost, depending on the cleanroom’s classification, while offering strategies to cut costs without cutting corners. Clean standards continue to climb, but with a few operational enhancements, you can avoid contamination economically. Continue Reading →
American School and University Magazine Article: “Laboratory Retriever”
Joe Kunkle, AIA, PE, LEED AP, Principal Account Executive at SSOE Group, and Lance Mushung, AIA, NCARB, Architect, co-authored this article featured in American School and University Magazine. Kunkle and Mushung, who have over 60 years of combined industry experience, confer on the subject of casework reuse. Whether you’re aiming for a LEED® certified project or significant casework cost savings, the shortcuts offered by this resourceful twosome will lead you down the right path. Continue Reading →
Laboratory Design Magazine Article: “Univ. of South Carolina, Horizon I Research Facility, Columbia, S.C.”
SSOE was featured in this Laboratory Design Magazine article highlighting a recently constructed five-story, 125,000 SF science and technology facility for which SSOE provided mechanical and electrical services, in addition to fire protection construction documents. This facility, referred to as Horizon I, supports programs in engineering, technology, scientific research, and industrial development of alternative energy sources—also serving to adjoin the University of South Carolina’s main campus and its “new urban ‘innovista’ research campus. Continue Reading →
Food Engineering Magazine Article: “Put positive pressure on facility airflows”
Mark Hoffman, Department Manager at SSOE Group, was recently featured in this article in Food Engineering Magazine. The article works to demystify airflow and room pressure questions in relation to food production, and offers expert suggestions to ensure cleanliness is achieved and cross-contamination avoided — namely at points in the process where the product is most vulnerable. From pressure differential gauges and processors, to filtration options and software tools, this article effectively covers a lot of ground, offering a collection of valuable tips that are far from intuitive. Continue Reading →
Laboratory Design Magazine Article: “Should your project undergo commissioning?”
David Wilson, PE, LEED AP, Senior Mechanical Engineer at SSOE Group, recently authored this article in Laboratory Design Magazine. The article explores when it’s worth it to consider commissioning for your facility through three case scenarios encountered by an HVAC commissioning expert. What is observed through testing and verification may prevent expensive operational problems from occurring, by detecting flaws and inefficiency prior to the end of the warranty period. The best approach is to be proactive in knowing what you need before it’s too late. Continue Reading →
Power Engineering Magazine Article: “CHP: Energy Independence Offers a Competitive Edge”
Economic analysis and design strategies for cogeneration increase industrial competitiveness. Tom Fitzpatrick, PE, Power Department Manager at SSOE, co-authored this illuminating article that highlights the benefits of combined heat and power (CHP). CHP — or cogeneration — is a sustainable energy alternative offering better efficiency and increased reliability at a lower cost. These benefits and other potential advantages offered by CHP can give an industrial company the advantage over competitors. Continue Reading →
Have a question regarding our services? Need assistance with an upcoming project? Send us an email. We look forward to hearing from you and will follow up soon.
Sign up to receive official SSOE Group news and updates!