Alan Liddy, AIA, NCARB, Senior Project Manager at SSOE, was recently published in Product Design and Development Magazine on the topic of cleanrooms. Alan explains that keeping cleanrooms clean can come at a lower cost, depending on the cleanroom’s classification, while offering strategies to cut costs without cutting corners. Clean standards continue to climb, but with a few operational enhancements, you can avoid contamination economically. Continue Reading →

Jens Ebert, PE, PMP, Senior Project Manager at SSOE, recently authored this article, which examines the phased approach to project execution referred to as front-end loading (FEL) and its many advantages. Also known as pre-project planning (PPP) and front-end engineering and design (FEED), the FEL approach to project delivery involves early project planning and engineering, so that design changes are easier and cheaper to accommodate, comparatively. FEL is very structured and can require more cost upfront, but projects are less likely to have issues or costly changes, and gives stakeholders an opportunity to make more informed decisions along the way. Continue Reading →

Alexandra Segers, Dipl.-Ing, PE, MS, General Manager of SSOE’s Southeast U.S. operations, was recently published in Area Development Magazine discussing the worldwide trend of OEMs—and subsequently suppliers—moving operations to Mexico. With this number growing every day, Alexandra reminds readers the Southeast U.S. is still a viable, competitive option for automotive parts production. Continue Reading →

Gavin Kaleta, PE, LEED AP, Mechanical and Process Department Manager at SSOE Group, co-authored an article published in HPAC Engineering Magazine that focuses on high-performance fan systems, which are critical to industrial processes. From air flow to duct leaks, the article digs deep into ANSI/AMCA Standard 210/ANSI/ASHRAE Standard 51, sharing real-world applications to optimize fan performance. Continue Reading →

Alexandra Segers, Dipl.-Ing, PE, Program Manager and International Account Executive at SSOE Group, was recently featured in this Site Selection Magazine article discussing Mexico as a growing, viable option for major league players in automotive (think Toyota, Ford, and BMW) who are crossing the border to set up shop. BMW sites the country’s high number of international trade agreements as a significant determinant in taking operations to Mexico. Segers, who is no stranger to international site selection and advised BMW on the project, explains that much evaluation goes into the decision-making process, with reliability and water being popular concerns for companies considering an investment in Mexico to better serve their customers. Continue Reading →

Matt Oberts, PE, LEED AP, Automotive and Industrial Division Facilities Manager at SSOE, recently published “An A/E Perspective on Optimizing the Design-Build Strategy” for Design-Build Institute of America. In his article, Oberts talks about design charrettes, which he defines as “an intensive, collaborative session that is held as early as possible in the life of the project.” This daylong assembly of project participants — from both the design side and the build side — sets the foundation for a successful project in which goals and objectives are understood, agreed upon, and ultimately achieved. Additionally, the design-build process itself becomes increasingly effective by employing the various components of Virtual Design and Construction (VDC). Through early process planning, and optimal implementation of 3D/BIM technology and measureable benchmarks, a design-build project has the potential to exceed client expectations, regardless of whether the focus is schedule or budget. Continue Reading →